Find out everything you need to know about sending your product in for repair. This includes locating a repair centre, the steps to follow to arrange a repair and a selection of FAQ’s to help answer any queries that you may have.
Please select your product using the search filters to ensure you find the correct authorised repair facility that can repair your Canon product.
You can then take your product directly to the repair centre or arrange for it to be delivered, please view the repair process for more information.
Please note – Depending on your country you may be eligible for an On-Site Warranty Service if you own an imageRUNNER C1225iF, PIXMA PRO-1, imagePROGRAF PRO-1000 or a selected MAXIFY or i-SENSYS printer. If your printer is covered by the Canon European Warranty System (EWS) then please first check for availability and, if eligible, contact us directly to arrange the On-Site Warranty Service. If you are not eligible for On-Site service then you can locate an authorised repair centre below.
MAXIFY & PIXMA Products – removal of ink cartridges from these products prior to shipping for repair will result in damage to the printhead and may invalidate your Canon warranty. Please follow the transportation instruction as per the User Manual for your Canon product.
In the first instance, we suggest that you refer to our consumer products support area which contains information that may be useful in helping you resolve your issue. After selecting your product, you will have access to frequently asked questions, user manuals, drivers, software and firmware downloads. There will also be other information that may be useful to you including how to contact Canon or a Canon Authorised Service Facility for telephone and email support.
In the event that you are unable to resolve your issue via these avenues and a product repair is necessary, please follow the process below. As there may be small local differences in the specific process per country, please check the support pages for your country of residence via our country selector.
1 - Locate your nearest Canon Regional Competence Centre or Canon Authorised Service Facility
Please use our repair centre locator tool to find the details of your nearest Canon Regional Competence Centre (RCC) or Canon Authorised Service Facility (ASF). All Canon ASFs are independent third party organisations and, as such, operate within their own terms of service (including fees/charges, turnaround times etc…). As these terms may vary to those used by the Canon RCCs, please contact the relevant ASF for further details, prior to sending an item for repair.
2 - Please print and complete the standard Canon repair form to return with your product
This form will provide your chosen repair facility with all of the information required to investigate the issue with your product, to repair it if required, and to update you on the status of your repair. If you are unable to print the form, please confirm the same information in a letter which you should send with your product.
3 - Ensure that you include all necessary information with the product being returned
If you are claiming a warranty repair, it is necessary to also include a dated proof of purchase for your product. Canon RCCs and ASFs cannot provide warranty repairs without receipt of any applicable supporting documentation.
4 - Ensure that the product is securely packaged for transit
By sending an item to a Canon RCC or ASF, you are not entering into an agreement with Canon, therefore Canon will accept no liability for any loss or damage that occurs during transit. We recommend that your product is safely and securely packaged. Depending on the value of the product, you may also wish to consider insuring the shipment.
Please note that it is always possible for you to take a product in person to a Canon RCC or ASF.
Where a product has been sent to a Canon RCC:
Your product will be registered onto our repair system and an acknowledgement message will be sent to you to confirm receipt.
If you are claiming a warranty repair for your product, an initial investigation of the product and supporting documentation will take place in order to confirm that the warranty applies. If a warranty repair applies, your product will enter our standard repair process and, upon completion, the product will be dispatched to you or made available for collection.
If for any reason it is determined that a warranty repair is not applicable, you will be informed of this accordingly and a cost estimate (based on the estimated cost of any required spare parts and labour) will be provided. You will then have the opportunity to agree to this estimate, prior to any chargeable repair work commencing. If this estimate is rejected then, under certain circumstances, a handling fee may be applied. Please check with your chosen Canon RCC for further details, prior to sending your product for repair. Additionally, selected products may fall under our ‘fixed price repair scheme’. If applicable, and the fixed price offer is rejected, a charge to cover return shipping may be applied.
Where a product has been sent to a Canon ASF:
The processes, fees, turnaround times etc… for Canon ASFs will vary. For full details, please contact your selected Canon ASF directly, prior to sending your product for repair.
PLEASE NOTE: The above information is provided for customer advice only and does not constitute an agreement of any kind between Canon and the customer. The specific terms and conditions of the Canon RCC or ASF will take precedence over all information provided on this page.
Please find a list of FAQ’s that can assist you if your product is in need of a repair.
Please note this information is only for Consumer Products Repair.
Q: How much will the repair cost?
A: The following repair guide prices are applicable only to the Canon Service Centre located at Unit 160 Centennial Avenue, Centennial Park, Elstree, WD6 3SG.
Should you wish to send your product into an Authorised Service Facility please contact them directly for further information. Please bear in mind that each repair centre will have their own independent repair prices.
Personalised Repair Cost
You can speed up your repair turnaround time* by 2 – 3 days and save the £35.00 + VAT estimate charge by not requesting an estimate.
*For non CPS customers the average repair turnaround time is 10 working days subject to spare part availability.
There is a £35.00 + VAT charge if you do not go ahead with the estimate. However, if you proceed with the repair, the time taken for the technician to produce the estimate will be incorporated into the final repair cost.
Fixed Price Repair
For Digital Compact Cameras, low end DSLR Cameras, Lenses and Speedlites. The Fixed Price includes the following:
The fixed price is waived for:
Q: How long will the repair take?
A: The following turnaround times are applicable only to the Canon Service Centre located at Unit 160 Centennial Avenue, Centennial Park, Elstree, WD6 3SG.
Our turnaround time for non-CPS members is within 3 weeks from the day you accept the repair costs, subject to spare part availability.
Our CPS Member Turnaround Times are as follows:
Please be aware that the turnaround time does not include:
All turnaround times are subject to spare part availability, and a maximum of 3 products can be booked in under the CPS turnaround time. Products damaged by impact or liquid contamination may exceed the CPS TAT’s stated above. Please view the CPS membership Terms and Conditions for more information.
Q: My product has developed a fault shortly after purchase, what are my options?
A: Canon will only repair your product under the terms and conditions of your warranty; alternatively you should contact your retailer for further assistance.
Q: My product is faulty, what are my options?
A: Canon provides a parts and labour warranty for 12 months from the date of purchase of your product. You will require proof of purchase to make a claim under your warranty. This does not affect your statutory rights as a consumer; alternatively please contact your retailer.
Repairs are chargeable outside the manufacturer warranty period; please contact an authorised repair centre for further assistance. Each repair centre will have their own independent repair prices. All repairs are subject to the terms and conditions of your warranty.
Q: If my product is faulty, can it be exchanged under warranty?
A: Canon will only repair your product under the terms and conditions of your warranty. Please view the warranty terms and conditions page for more information.
Q: Can I hand in my product personally to the Authorised Service Facility?
A: If you would like to deliver your product yourself, please contact an appropriate Authorised Service Facility directly for their opening times. We generally recommend your product is sent to us by a delivery agent (for example, The Royal Mail).
Q: Who do I contact for a repair status?
A: Please contact the Authorised Service Facility that you returned your product to for repair.
Q: What service options are available for portable printers (i.e IP80, IP90, iP100 etc)?
A: If the product is within the warranty period an on site service is available from Cura Technical. However, if you wish to do so, it can be returned to CRC Tasktron Ltd for repair. If the printer is out of warranty the customer has an option of purchasing an on site service, or returning the unit to Electroversal or CRC Tasktron Ltd who will carry out a service estimate.
Q: I have an extended warranty called "MasterCare/ What Ever Happens" how do I obtain service under this scheme?
A: MasterCare/ What Ever Happens warranties are not issued by Canon. Refer to your retailer for information on contacting MasterCare directly.
Q: How do I obtain an end- user replaceable part for my camera, video, office product – printer, scanner, multifunctional etc?
A: Photo/Video Products Only
H. Lehmann Limited
247-249 London Road
Tel: 01782 413 611
Fax: 01782 744 579
Photo Products Only
Colchester Camera Repair Services
6 Kings Court
Off Newcomen Way
Severalls Business Park
Tel: 01206 843 322
Fax: 01206 843 323
Office Products Only
CRC (Tasktron Ltd)
Unit 3 Wintonlea
Monument Way West
Tel: 01483 776 060
Fax: 01483 721 389
Please print off this form and fill in all the information requested. This will provide us with all of the information we require to investigate the issue with your product, to repair it if required, and to update you on the status of your repair. If you are unable to print the form, please confirm the same information in a letter which you should send to us with your product.
Please print and complete the standard Canon repair form to return with your product